Give your lawn a manicured look at high mowing speeds with the 60" AcrEase finish cut pull behind mower.
Almost any ATV, small riding mower or tractor, 0-turn radius mower or utility vehicle can tow the AcrEase, which can trail directly behind the vehicle or off to the side.
Several hitching options are available with the AcrEase, which can provide maximum stability at high mowing speeds and on steep banks.
A floatation kit also is available. The extra front and back tire grants access to hard-to-reach areas, such as the edge of a creek bank.
The Lawn and Garden Hitching bolts directly to an existing hitch on any riding lawn mower or zero turning radius mower. This allows for close hitching of the AcrEase and telescopes in or out to adjust for the tow vehicles deck width. This also provides a maneuverable quick response system with maximum stability at high mowing speeds and on steep banks.
Possible configurations:
- One AcrEase mower
- Two AcrEase mowers (one on the left and one on the right).
- Two AcrEase in tandem (both off to the left side).
The ATV tongue hitches directly to the tow vehicles existing hitch with a provided clevis pin. It offers quick and easy initial installation. The ATV tongue can be quickly interchanged from the offset position to direct behind towing. It also provides quick response maneuverability and stability at high mowing speeds and on steep banks may be reduced slightly.
Note: In order to pull multiple mowers, the Lawn & Garden Hitching must also be purchased.
The AcrEase Floatation Kit adds an extra front and back tire, bolted in the center section of the mower deck. This is handy in the following applications:
- Rough uneven ground where added floation is needed
- Hard to reach areas at the waters edge around ponds
- Extending over a creek banks edge
- Steep road banks where added traction is needed
- Gradual crowned or peaked areas in a yard
 |  |
- Class Mower: Commercial
- Engine Make: OHV Briggs & Stratton
- Engine Model: Intek
- Engine HP: 19.5
- Lubrication Method: Partial Pressure
- Electric Start (Battery Not Included): Yes
- Number of Mower Blades: 3 - 20"
- Blade Tip Speed (ft/min): 17,500
- Cutting Width: 58"
- Cutting Height: 1.0 - 4.0"
- Height Adjustment Method: Bolt Stop On Each Corner
- Blade Engagement Clutch: Centrifugal
- Clutch Engagement Speed: 1850 RPM
- Deck Metal Thickness: 10 GA
- Deck Top Plate Thickness: 7 GA
- Weight: 380 lbs.
- Pneumatic Fixed Rear Tire: Yes
- Rear Tire Size: 13/500x6, 2 ply turf
- Semi-Pneumatic Front Tires on Casters: Yes
- Front Tire Size: 9/350x4, slick
- # Anti-Scalp Wheels under Deck: 6 w/front skids (4 F, 2 R)
- Hour Meter / Tachometer: Yes
- Fuel Tank Size: 3-3/4 Gal.
- Blade Spindles: 25mm Shaft
- Bearing #: 6205 - 2 RST
- Drive Method: 1 B Section "V" Belt
- 1 Year Warranty: Non-Commercial (Due To Engine)
